How To Solve The Sand Hole Problem When Using An Electronic Heat Sink
Jul 01, 2022| How to solve the sand hole problem when using an electronic heat sink
Some users have a few sand holes on the heatpipe when using an electronic heatsink. The main reasons are water corrosion and the poor corrosion resistance of steel. Grasp the direction of the water flow to achieve a good heating effect, please follow the steps to understand. The following is a detailed description.
Customers who dissipate heat from pipes and heat pipes should be clear that the choice of water inlet and outlet will have a good preheating effect, but the disadvantage is that the pipes are not beautiful. The temperature control valve generally uses a straight valve to enter and exit the bottom, and other methods use a mixing valve.
Therefore, it is necessary to comprehensively consider to achieve a good practical effect, and the heat dissipation of the high-temperature fan must ensure the practical effect of beautiful and generous interior decoration. The user should check the size and width of a set of heat pipe radiators with the heat pipe radiator supplier in order to fix the position of the heat pipes when walking the pipes. It is recommended to use brand-name heat pipe radiators to achieve good heating effect.
Power radiators are usually profile radiators and cooling fans, such as computer CPU radiators. Sometimes the computer's power radiator keeps beeping. We power on the circulating fan, remove the fan, clean the dust, and open the sticker stuck in the middle of the fan. We will see a small motor, put some oil in it. The power supply is hot and needs a power supply heatsink.
If the quick quenching furnace accumulates dust and the radiator does not work, you can wash the removed fan with tap water, just like washing clothes, wash it hard, and then dry it for 2 days. Then try it. If there is still noise, it can only be replaced, and the power radiator cannot be used.